Anyy reputable west-melboune mechanics?

Got a problem with your FTO? ask about it here

Moderators: IMC, Club Staff

Post Reply
User avatar
Cassar2610
Grease Monkey
Posts: 113
jedwabna poszewka promocja
Joined: Tue Jan 31, 2006 6:00 pm
Location: Melbourne

Anyy reputable west-melboune mechanics?

Post by Cassar2610 »

Hi All,

I am looking for a good FTo mechanic in the west (or north) Melbourne regiona s my poor baby needs some serious work. for a little while now I have had those nasty oil leaks I hear so much about frm the cam seals and just recently I have been leaking coolant as well :cry: It looks to me like the water pump is leaking and I need to refill it every second day.
I must bite the bullet and get this beast back to top shape and would love to know if anyone can recomend a good mechanic. I have seen all the posts for the mechanics on the eastern side of melbourne and am hoping there is a good one in the west.

Also if anyone has had similar problems with leaking coolant please let me know. The water looks to be comming from up and behind the belts on the left side of the engine and I do believe that is where the water pump is.

Thanks in advance :)
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Post by vipfto »

sorry cant help with mechs for you

but yes waterpump sounds shot and make sure when you get replaced also get cambelt, tensioners, cam seals (most likely where leaks are), rocker cover gaskets, and while your there also do powersteer/air con and alternator belts and check pully's they have been known to have bearing issues :D
FTO GR-TURBO
172KW ATW @ 11PSI
User avatar
Cassar2610
Grease Monkey
Posts: 113
Joined: Tue Jan 31, 2006 6:00 pm
Location: Melbourne

Post by Cassar2610 »

Anyone know how much all this should cost so I dpn't get ripped off?
Sounds like allot of manual hours and I may have to take it to a local mechanic who most likely will be scared of this beast.

Cheer for the summary as well
User avatar
vipfto
Forum Moderator
Posts: 4154
Joined: Mon Oct 29, 2007 5:00 pm
Location: Adelaide

Post by vipfto »

should be around $1100 ish in total depending on what they charge over there for labour the parts from memory are around 4 to $500 roughly:cry:

Any decent mech should be able to do this it is not difficult job just time consuming and they should not be scared of it :!:
FTO GR-TURBO
172KW ATW @ 11PSI
Post Reply