Want to buy ilding controller

Need something, Put it in here.
Private Sales Only

Moderators: IMC, Club Staff

Post Reply
User avatar
giez26
Newbie
Newbie
Posts: 7
jedwabna poszewka promocja
Joined: Sun Feb 25, 2007 6:00 pm

Want to buy ilding controller

Post by giez26 »

my gpx mivec manual needs a new idling controller. it revs up n down in neutral moving, and when stopped goes up to 1500RPM. anyone know what to do? mechanic says idle controller is faulty. please help!
Top
User avatar
Supplanter
Forum Moderator
Posts: 6422
Joined: Tue Oct 22, 2002 5:00 pm
Location: Arizona Bay
Contact:
Contact Supplanter

Post by Supplanter »

Try searching the forums for "stpper motor", you might not need a new one it might just a clean.
LED ALL the things.
Top
User avatar
Grue
Veteran Mechanic
Posts: 876
Joined: Fri Sep 17, 2004 5:00 pm
Location: Taranaki, New Zealand.
Contact:
Contact Grue

Post by Grue »

Yup, stepper motor. Just got my replacement from Nardek. 2 bolts, unhook the battery for half an hour for the ecu to reset, and good as new.

www.nardek.com
If you can't dazzle them with dexterity, baffle them with bull...
Top
JOeJOe
Oldtimer
Posts: 1554
Joined: Wed Mar 29, 2006 6:00 pm

Post by JOeJOe »

Grue wrote:Yup, stepper motor. Just got my replacement from Nardek. 2 bolts, unhook the battery for half an hour for the ecu to reset, and good as new.

www.nardek.com
How much did it cost?
Top
User avatar
Grue
Veteran Mechanic
Posts: 876
Joined: Fri Sep 17, 2004 5:00 pm
Location: Taranaki, New Zealand.
Contact:
Contact Grue

Post by Grue »

$195 for brand new from Nardek, and was happy with that. Part Number 510-16. They knew what an FTO was and what engine it had, which is always reasuring. If in doubt, give them the serial number off your old one and they'll double check which one you need.

My local Mitsi place wanted $700 for a new one. :lol:

I got my last one as a recon from Kempy's, and only lasted 2 1/2 years before going belly up again.

There used to be a few on ebay for cheap, but there was confusion on whether these were correct or not.
If you can't dazzle them with dexterity, baffle them with bull...
Top
User avatar
tenji
Mechanic
Posts: 517
Joined: Thu Feb 28, 2008 6:00 pm
Location: melbourne

Re: Want to buy ilding controller

Post by tenji »

giez26 wrote:my gpx mivec manual needs a new idling controller. it revs up n down in neutral moving, and when stopped goes up to 1500RPM. anyone know what to do? mechanic says idle controller is faulty. please help!
mine had a problem where it waS IDLING VERY LOW and then would hunt every now and then.

so i gave it a full service and cleaned the throttle body out with some carby cleaner and it idles like a charm now..
Top
Post Reply

Return to “Wanted To Buy”