Stepper Motor

Post by **I8A4RE** » Fri Feb 29, 2008 8:22 pm

CAPS

Courtesy of dstock
http://www.completefto.com.au/CompleteFTO.asp?hid=164

payaya · Post by **payaya** » Fri Feb 29, 2008 10:54 pm

dstocks wrote:OK was clicking on the wrong PNC in Caps. Is this better:

MD614568 Servo Kit, throttle body
MD628054 Servo Kit, throttle body
MD628056 Servo Kit, throttle body

So which one for a 95 model GR V6?

I went on Camskill:

http://www.camskill.co.uk/products.php?plid=m3b11s9p362. It states the FTO with the following part numbers, its invisible so ya gotta do a text search.

Lists these three:
ADC47430 MD614568 MD628054

Go to the EVO 2-3 it lists part numbers:
ADC47430 FTO MD614568 FTO MD628054 EVO MD614368 EVO MD628051

So that means they both share:

MD614568 FTO MD628054

Which means they are the same????

Now on ebay:
http://cgi.ebay.com.au/IDLE-SPEED-AIR-C ... m153.l1262

$90 bucks?????????

Tbone · Post by **Tbone** » Sat Mar 01, 2008 9:38 pm

Hi, the Mitsubishi guy said he was trying to get a stepper motor from Repco for me but he wasn't sure if it was the right fit for and FTO.
Does anyone know if you can get FTO stepper motors from Repco or any other distributor?
My car is a 95 GPX - any ideas of part numbers? Is the stepper motor in this car the same as any other Mitsubishi?

This motor is frustrating the hell outta me over here!

Post by **dstocks** » Sun Mar 02, 2008 8:19 am

the part numbers are listed at the top of this thread. I wouldnt have thought repco would be able to get something that matched it, or it would have been mentioned on the forum at some stage in the past.

payaya · Post by **payaya** » Thu Mar 06, 2008 10:04 pm

dstocks wrote:the part numbers are listed at the top of this thread. I wouldnt have thought repco would be able to get something that matched it, or it would have been mentioned on the forum at some stage in the past.

Hey mate so its MD6147635 or MD614736??

Not the ones I mentioned above?

Thanks

Post by **dstocks** » Thu Mar 06, 2008 10:23 pm

I did get a price back on these, and its better than the Mitsi Aust price by quite a bit, but it isnt as good as the Ebay price. Having said that, the part number is wrong, but I guess if it fits and works, that doesnt really matter.

payaya · Post by **payaya** » Fri Mar 07, 2008 6:35 pm

payaya wrote:
dstocks wrote:the part numbers are listed at the top of this thread. I wouldnt have thought repco would be able to get something that matched it, or it would have been mentioned on the forum at some stage in the past.
Hey mate so its MD6147635 or MD614736??

Not the ones I mentioned above?

Thanks

MD6147635 is a TPS according to the Ebay guy.

Tbone · Post by **Tbone** » Tue Mar 11, 2008 6:42 pm

Hi guys,
I can get myself a stepper motor with a md 614568 serial number from a 95 FTO for $165.

Can any one tell me if this is the right motor for a GPX - I'm not sure if its a GR model or if there is even a difference between the motors????

Help?

Thanks, Tbone

tenji · Post by **tenji** » Fri Mar 14, 2008 2:10 pm

well the fto i got does the same thing and idles at 300-500rpm but doesnt stall

stepper motor has been changed and still does it...

Post by **I8A4RE** » Fri Mar 14, 2008 4:13 pm

I thought the idle speed is adjustable? Via the idle speed adjustment screw

nontoxic · Post by **nontoxic** » Sat Mar 15, 2008 3:07 pm

Hi, here in NZ we have a dismantler called Kempys Bitza Mitsi's - they do exchange recon steppers worldwide. GIve them a call or the net on http://www.kempys.co.nz/ they know what they're talking about and are a great help.

Post by **I8A4RE** » Sat Mar 15, 2008 5:36 pm

nontoxic wrote:Hi, here in NZ we have a dismantler called Kempys Bitza Mitsi's - they do exchange recon steppers worldwide. GIve them a call or the net on http://www.kempys.co.nz/ they know what they're talking about and are a great help.

Cheers mate most of us are all aware of kempys and have even brought products of them

But thanks anyway

tenji · Post by **tenji** » Sun Mar 16, 2008 12:02 am

I8AFRE wrote:I thought the idle speed is adjustable? Via the idle speed adjustment screw

i am going to try it as soon as i get back to melb next week currently in sydney atm

robsta · Post by **robsta** » Thu Mar 20, 2008 12:50 pm

I just bought a new stepper motor from Nardek, shipped it up over night to me. I'm going to put it on tonight
It's a genuine Mitsubishi part

Nardek part number 510-16 $125 inc shipping seems like a good price to me

Post by **dstocks** » Thu Mar 20, 2008 1:21 pm

Thats not a bad price at all if its genuine

payaya · Post by **payaya** » Fri Apr 04, 2008 2:30 am

robsta wrote:I just bought a new stepper motor from Nardek, shipped it up over night to me. I'm going to put it on tonight
It's a genuine Mitsubishi part

Nardek part number 510-16 $125 inc shipping seems like a good price to me

Thats what they quoted me! Does it work?

Post by **I8A4RE** » Sat May 03, 2008 4:43 pm

Rob how did you go with this fitted alright??? Yours is mivec yeah???

Shahrez · Post by **Shahrez** » Tue May 06, 2008 3:57 pm

any idea if this will fit??

http://cgi.ebay.com.au/MD628059-Mitsubi ... 18Q2el1247

Shahrez · Post by **Shahrez** » Tue May 06, 2008 8:24 pm

by the way, i contacted Nardek.com.au for a quote and this was their reply

510-16 cost is AU$195.00 includes postage.

510-16 is for FTO's and are new genuine Mitsubishi part

hence previously someone mentioned that it cost $125 including postage! and iam in perth, iam sure it doesnt cost an extra $75 to post down here!

ftokiwi · Post by **ftokiwi** » Thu May 08, 2008 11:36 am

has anyone got the link to the diy page for fixing the stepper motor?