Rotars Front + Rear

AMACHA · Post by **AMACHA** » Fri Apr 18, 2008 6:17 pm

hey all does anyone have any of these or no part numbers or where to get them i called mitsubishi and they wanted 375 for 1 for the front and 150 for 1 for the front wtf of course its ex japan thouganyone help me out?dstocks u got any prices mate?

Post by **aza013** » Fri Apr 18, 2008 6:31 pm

just go to an auto shop and get a set for an evo 3 they are a strait fit.

pimped · Post by **pimped** » Fri Apr 18, 2008 7:13 pm

Don't buy stock rotors, they are a rip off. Get DBA ones from repco, rpw or supercheap. I think the slotted rotors are $150 each. The part numbers are below:

DBA 425 - stock front rotors
DBA 425S - Slotted front rotors

rock_it · Post by **rock_it** » Fri Apr 18, 2008 7:18 pm

aza013 wrote:just go to an auto shop and get a set for an evo 3 they are a strait fit.

Evo III are 4x114.3

http://www.cardomain.com/member_pages/s ... 7_full.jpg

But RDA do em (which are the ones I pictured above) ....

AMACHA · Post by **AMACHA** » Sat Apr 19, 2008 2:29 am

pimped wrote:Don't buy stock rotors, they are a rip off. Get DBA ones from repco, rpw or supercheap. I think the slotted rotors are $150 each. The part numbers are below:

DBA 425 - stock front rotors
DBA 425S - Slotted front rotors

whats the code of the rear ones mate?

Post by **dstocks** » Sat Apr 19, 2008 8:44 am

yeah, id be going for those too. The stock ones are a weakpoint anyway

nvr2low · Post by **nvr2low** » Sun Apr 20, 2008 11:34 pm

i am getting slotted and nippled ones from a brake specialst up here for 220 for a pair gold ones

Post by **dstocks** » Mon Apr 21, 2008 9:34 am

That sounds pretty reasonable

Post by **Bennoz** » Mon Apr 21, 2008 11:29 am

Dont get 400 series, they are just standard rotors with holes or slots machined into them.

Part numbers for 4000 series are here.

http://www.ftoaustralia.com/modules.php ... 3&start=60

pimped · Post by **pimped** » Mon Apr 21, 2008 12:52 pm

AMACHA wrote:whats the code of the rear ones mate?

DBA527 rear ones only seems to come as stock rotors, but I do recall seeing 4000 series rear rotors on an FTO

all these part numbers are assuming you have a GPX, I think GR,GX and GS are different sizes

AMACHA · Post by **AMACHA** » Mon Apr 21, 2008 6:50 pm

so what are the part numbers exactly for the rear ones or are they the same as the front?

pimped · Post by **pimped** » Mon Apr 21, 2008 8:05 pm

Disc Brakes Australia is the company.

Stock front rotor numbers are:
DBA 425L - front left
DBA 425R - front right

Slotted front rotor numbers are:
DBA 425SL - front left
DBA 425SR - front right

Stock rear rotor numbers are:
DBA 527L - rear left
DBA 527R - rear right

rears are smaller than the fronts so no, they ain't the same.
Repco or Autobarn should be able to confirm those part numbers.