Hey guys, every time i turn the steering wheel i get a scraping noise and i think the prior owner put a boss kit that was too big for the fto and the autoteknica wheel. I was wondering if using a boss kit too big would also affect the indicators, because on smaller turns, the indicators don't switch off and only when i rotate the wheel more it turns off. Also where would one buy a boss kit for an FTO.
Cheers in advance guys
Boss kit
Moderators: IMC, Club Staff
-
MR2YEN
- Grease Monkey
- Posts: 253
- jedwabna poszewka promocja
- Joined: Tue Feb 19, 2008 6:00 pm
- Location: Sydney > West
-
maggsy
- Oldtimer
- Posts: 1236
- Joined: Mon May 28, 2007 5:00 pm
- Location: Gold Coast, Queensland
using a boss kit that is not designed for the FTO can stop the indictors working properly.
just go to Autobarn and ask for one, i think mine cost $70
before you go and buy it though make sure that the one you have on their is put on correctly, there is a small arrow which has to point up located on the metal with the bolt holes.
just go to Autobarn and ask for one, i think mine cost $70
before you go and buy it though make sure that the one you have on their is put on correctly, there is a small arrow which has to point up located on the metal with the bolt holes.
"How come when you go to bed at night you wake up even more tired in the morning?...Sorta' defies the point of getting a good night sleep."
