KMC El Dial guide

General Questions and comments

Moderators: IMC, Club Staff

Post Reply
User avatar
dstocks
National Vice President
Posts: 9529
jedwabna poszewka promocja
Joined: Fri Jun 24, 2005 5:00 pm
Location: Utopia
Contact:

KMC El Dial guide

Post by dstocks »

For those of you that bought them recently, I have just done up a guide:

http://www.completefto.com.au/CompleteFTO.asp?aid=493

Have fun ;)
Complete FTO (http://www.completefto.com.au/completefto.asp)
    Image
    If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
    User avatar
    Richy
    Mechanic
    Posts: 517
    Joined: Mon Dec 18, 2006 6:00 pm
    Location: Sydney

    Post by Richy »

    Another piece of nice write up....good work man.

    one small suggestion... add a pic of the dials at nite when lit up....

    :salut: :thumleft:
    User avatar
    dstocks
    National Vice President
    Posts: 9529
    Joined: Fri Jun 24, 2005 5:00 pm
    Location: Utopia
    Contact:

    Would you believe....

    Post by dstocks »

    Would you believe it if I told you the bottom one was with the dials lit up.....

    It was about 7pm. I guess I need to wait for it to be a bit darker before taking a picture.
    Complete FTO (http://www.completefto.com.au/completefto.asp)
      Image
      If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
      User avatar
      RallyMad
      Oldtimer
      Posts: 1223
      Joined: Tue Mar 25, 2003 6:00 pm
      Location: Toowoomba

      Post by RallyMad »

      Thanks for that dstocks, now to fix my dodgy attempt.

      Another bit of advice, don't use webbed double sided tape from auto stores, it's way to thick. Just get some from a newsagency.

      On the lit front I found that unless you have them more green then blue you can't really make out that they are lit during the day.
      User avatar
      maggsy
      Oldtimer
      Posts: 1236
      Joined: Mon May 28, 2007 5:00 pm
      Location: Gold Coast, Queensland

      Post by maggsy »

      at last. ive been waiting for this guide. :P

      thanks
      "How come when you go to bed at night you wake up even more tired in the morning?...Sorta' defies the point of getting a good night sleep."

      Image
      User avatar
      Richy
      Mechanic
      Posts: 517
      Joined: Mon Dec 18, 2006 6:00 pm
      Location: Sydney

      Post by Richy »

      Would you believe it if I told you the bottom one was with the dials lit up.....

      It was about 7pm. I guess I need to wait for it to be a bit darker before taking a picture.
      daylight saving.... :drunken:
      User avatar
      RallyMad
      Oldtimer
      Posts: 1223
      Joined: Tue Mar 25, 2003 6:00 pm
      Location: Toowoomba

      Post by RallyMad »

      another bit of advice. I'd forget about running the wires through bulbs holes and just cut the plastic, I've done this now, only took me 30 minutes to pull it all out, cut and refit. Unfortunately it was to late for my clock, it's already cracked and stuffed too :cry:
      Post Reply