Pictures

Post by **dstocks** » Mon Oct 29, 2007 9:47 pm

Some months ago, I promised piccies of my Aero. Finally got around to taking a few....

Any comments welcome....

eThix · Post by **eThix** » Mon Oct 29, 2007 9:51 pm

sooo white and clean

wish mine was,

FTO338 · Post by **FTO338** » Mon Oct 29, 2007 11:05 pm

Nice, clean and with tasteful mods.

Dam i'm so tempting to get a GPvR now.

eThix · Post by **eThix** » Tue Oct 30, 2007 12:21 am

so what do you get in the Aero edition?

Delvance · Post by **Delvance** » Tue Oct 30, 2007 12:23 am

Art...
Wish i still had my car

maggsy · Post by **maggsy** » Tue Oct 30, 2007 1:39 am

eThix wrote:so what do you get in the Aero edition?

i would like to know the same thing

Post by **dstocks** » Tue Oct 30, 2007 7:57 am

lol, I would like to know as well. Ive been trying to nail that down, but keep getting conflicting information. Im just about at the point of writing Mitsubishi Japan a letter to try and find out.

I suspect that the vast majority is just getting certain options as standard.

Post by **Supplanter** » Tue Oct 30, 2007 9:35 am

Is your intake red or blue?

Post by **Bennoz** » Tue Oct 30, 2007 9:52 am

And blue headers?

Richy · Post by **Richy** » Tue Oct 30, 2007 9:56 am

bloody nice car mate....making me jealous.....

btw...did the arc air box and intake pipe come with the car...and and andd....what head unit have u got there...??

Post by **dstocks** » Tue Oct 30, 2007 10:41 am

am i better off with a Air Filter Custom Pipe or a custom pipe running straight to the floor

Im guessing you are talking about the air intake vs Cold air induction pipe. Answer is both. I only have the intake fitted at the moment. Still need to fit my CAI setup to this. It will feed air from the front bar.

Is your intake red or blue?

UAS intake was red at 4pm and blue at 5pm (well spotted)

.....

And blue headers?

Yep, sanded back the paint on the set I got from RPW and hit it with heat proof blue.

did the arc air box and intake pipe come with the car...and and andd....what head unit have u got there

Bought the ARC box second hand off an ex club member, but you can get them from Perfect Run (www.perfectrun.com.au). The pipe is the rubber UAS one. Head unit is an Ebay cheapie (Eonon). Cost me $220 + postage and has the full double din screen. Plays DVD, mp3 TV, reversing camera etc and has a USB port and a card reader. I think its pretty good considering what I paid for it. The picture is nice and crisp and the sound is pretty reasonable.

Richy · Post by **Richy** » Tue Oct 30, 2007 12:25 pm

Bought the ARC box second hand off an ex club member, but you can get them from Perfect Run (www.perfectrun.com.au). The pipe is the rubber UAS one. Head unit is an Ebay cheapie (Eonon). Cost me $220 + postage and has the full double din screen. Plays DVD, mp3 TV, reversing camera etc and has a USB port and a card reader. I think its pretty good considering what I paid for it. The picture is nice and crisp and the sound is pretty reasonable.

Interesting.....Eonon....i am using their rear camera and 7"LCD Rear Mirror...yeah...think they are pretty good.

oNce again...nice ride...

Post by **dstocks** » Tue Oct 30, 2007 12:33 pm

Are you using their reversing camera on the FTO?. If so, what model is it and could you show me a pic of the camera on the back of the car. Was considering this as it plugs straight into my head unit, but was worried about how big the camera is and how ugly it might look.

Oliver89 · Post by **Oliver89** » Tue Oct 30, 2007 1:14 pm

dstocks wrote:
am i better off with a Air Filter Custom Pipe or a custom pipe running straight to the floor
Im guessing you are talking about the air intake vs Cold air induction pipe. Answer is both. I only have the intake fitted at the moment. Still need to fit my CAI setup to this. It will feed air from the front bar.

ohh okays i understnd thank man , hmm ill look into it and see what i can do. Thanks mate.

Richy · Post by **Richy** » Tue Oct 30, 2007 3:20 pm

Are you using their reversing camera on the FTO?. If so, what model is it and could you show me a pic of the camera on the back of the car. Was considering this as it plugs straight into my head unit, but was worried about how big the camera is and how ugly it might look.

i am using their camera model 743... its not very noticeable...i will take a photo once i get my car back from maytech....hopefully by end of the week...
anyway the camera is good to see whats at the back, but not much for distancing...

manofwood · Post by **manofwood** » Tue Oct 30, 2007 5:22 pm

i have a version r and noticed that you have different scuff plates inside the door moulds, you have a version r decal on the front bumper and you have driving lights on the outside ports of your bumper with your blinkers on the inside ports, i dont have the lights at all, and the blinkers are on the outside ports for mine. you also have skirts, mine doesnt have them at all

oodLes · Post by **oodLes** » Wed Oct 31, 2007 8:20 am

Nice mate. Very nice.

Post by **dstocks** » Wed Oct 31, 2007 8:58 am

different scuff plates inside the door moulds

Yep, theyd be light up kick plates (FTO glows blue). They are an optional part. You see them up for sale every now and then. They cost a bit to get though.

version r decal on the front bumper

I think yours would have had one (I think they all had that sticker). It has probably been removed or your front bar has been repainted. You can probably get one if you want it. Part Number is one of these:

DECAL, VERSION R(MR361013)
DECAL, VERSION R(MR361006)
DECAL, VERSION R(MR361011)
DECAL, VERSION R(MR361010)
DECAL, VERSION R(MR361014)
DECAL, VERSION R(MR361008)
DECAL, VERSION R(MR361009)
DECAL, VERSION R(MR361012)
DECAL, VERSION R(MR361007)

Would likely cost$50 + though im guessing

driving lights on the outside ports of your bumper with your blinkers on the inside ports

Bloody compliance regulations. With the current rules, the only way to comply a facelift FTO is to put the indicators on the inside (its to do with angles of visibility). When these get changed over, the driving lights dont fit easily into the outside holes, so they just get tossed in most cases. I managed to keep all the parts that got swapped out and have manufactured brackets so they fit on the outside. My Xenon headlights were removed during compliance too

. Still thinking of putting the hid units back in (but they arent technically legal anymore). Funny that considering there are facelift FTO's driving around that were complied under the old system with Xenons in them.

you also have skirts, mine doesnt have them at all

I have heard somewhere that skirts were an optional component on the GPvR, but hadnt managed to confirm it anywhere. This would explain why you dont have them.

Oliver89 · Post by **Oliver89** » Wed Oct 31, 2007 2:29 pm

right i am in the need of stickers for my Version R , why because it got resprayed in japan before it got imported to aussie land.

so where can i get my Version R stickers and all from ?

Post by **dstocks** » Wed Oct 31, 2007 5:02 pm

Mitsubishi or Kempy's

FTO AUSTRALIA

Pictures

Pictures

lol

Red

Rear Camera

Re: Red

differences

Mitsubishi