EOI : Custom Conrods & Pistons
Posted: Mon Jul 09, 2012 4:10 pm
Hey all,
Okay originally i was going to do a massive conversion and strength'n my engine but probably not going to so im still deciding if i should sell or not, but if i get a decent price might sell.
Have :
Pauter Custom Conrods
These cost me $1900 delivered to me, im pretty sure i still have the reciept showing the total amount paid, really was $1500 but custom australia put $400 on taxes and other sh*t, and still was a delay to get them.
These were going on a 6a12 galant engine, but the rods off the galant and fto are the same spec.
And have Ross Racing Pistion
Again these were for a galant so is 8.5:1 and not the fto, but if your thinking of turbo'n maybe this compression is right for you ?
Also these were custom made to 79mm and not the 78.4mm (made them to still fit in the standard head gasket.
These cost me $1300-$1400 delivered (gotta check find reciept but roughly that)
Anyone interested in any ?
If so pm me and please if you really are interested and offer something stupid like $500 for the rods then pointless messaging me, i dont mean it in a bad way just dont wanna waste mine and your time.
Pictures of the them will be posted up once i get time - thanks .
Okay originally i was going to do a massive conversion and strength'n my engine but probably not going to so im still deciding if i should sell or not, but if i get a decent price might sell.
Have :
Pauter Custom Conrods
These cost me $1900 delivered to me, im pretty sure i still have the reciept showing the total amount paid, really was $1500 but custom australia put $400 on taxes and other sh*t, and still was a delay to get them.
These were going on a 6a12 galant engine, but the rods off the galant and fto are the same spec.
And have Ross Racing Pistion
Again these were for a galant so is 8.5:1 and not the fto, but if your thinking of turbo'n maybe this compression is right for you ?
Also these were custom made to 79mm and not the 78.4mm (made them to still fit in the standard head gasket.
These cost me $1300-$1400 delivered (gotta check find reciept but roughly that)
Anyone interested in any ?
If so pm me and please if you really are interested and offer something stupid like $500 for the rods then pointless messaging me, i dont mean it in a bad way just dont wanna waste mine and your time.
Pictures of the them will be posted up once i get time - thanks .
I am also running 8.5:1 comp with 90mm pistons there is a bit of work involved in machining the block but you wouldnt put standard size pistons back in 
i payed $3500 for my pistons and rods 
so looks like thins is a win win