EOI on 5 UAS intake pipes

[storm hawk]

there all the same inside pink

[evoman]

If anyone wants to try and get hold of one of the three red ones, just email John at UAS directly. No point going through me for that.

If you miss out on a red one and you still want a UAS pipe, or you only want a black one, put your name on the list and we'll see if we can get the numbers to have them made again.

[dr390]

im down with evo man, i wouldn't mind either

[storm hawk]

I will try and kick this again. We need 8 There is 6 with the two i need. Only two more required .These are a good simple add on power up grade for a very little dollars. Plus you get an exhaust note with it.

[storm hawk]

One Only Required.
1 KUSTOM_FTO
2 Evoman
3 Zuihoujueding
4 MH999
5 DR390
6 Storm Hawk
7 Storm Hawk
8_________________ONE ONLY REQUIRED

[bass_twitch]

I am still interested in this.. what is the deal with delivery/pickup?

EDIT:
also another question, atm I have a pod filter just straight off the stock pipe, and the stock pipe is stiff enough that it holds it up.. is this piping stiff or flexi?
(just want to know if I'll have to build a housing)

[bass_twitch]

One Only Required.
1 KUSTOM_FTO
2 Evoman
3 Zuihoujueding
4 MH999
5 DR390
6 Storm Hawk
7 Storm Hawk
8_________________ONE ONLY REQUIRED

Iv just emailed uas and there are no red ones left,
So I'm going to do a little more research, but I might jump in and be the 8th one. Is it pickup or delivery though?

[storm hawk]

One Only Required.
1 KUSTOM_FTO
2 Evoman
3 Zuihoujueding
4 MH999
5 DR390
6 Storm Hawk
7 Storm Hawk
8_________________ONE ONLY REQUIRED

Iv just emailed uas and there are no red ones left,
So I'm going to do a little more research, but I might jump in and be the 8th one. Is it pickup or delivery though?

I,m not sure on delivery/pick up But i think it only Sydney Where Evoman when you need him. It his baby We only need ruber stak thing Not the hole kit the kits only hose clamps and pod filters You buy them a coles in the fruit and veg section now.

[evoman]

Ok.

I have been in contact with John again to confirm a few things.

1) He will absorb a maximum of 3, so we actually need 9 100% certain people before we can get this going (I only guessed he would absorb 4)
2) His supplier has informed him that ETA would be a month from time of order
3) Just to confirm prices.
- $195 for the black intake only and adapters and hose for the crank case vent
- $350 for the whole kit as listed on the site. Keep in mind the deciding factor in the manufacture of this kit is the pipe, so we'll just treat this as an EOI for the pipes only at this stage, however if anyone wants the full kit, that could be arranged after.
4) Price does not include delivery, so would vary depending on where you are. I can't envisage it being too expensive.
bass_twitch - if you are in western Sydney it would be easiest for you to pick them up. UAS are based at Seven Hills which can't be too far from you.

I also suspect that if the 3 red ones have been taken that someone on this list has them (I am getting a red one, but will get a black one if it happens), possibly MH999?, which would mean we are still low on numbers.
Before this could go through, we would also need the people on the list to confirm that they are 100% committed to buying the pipe as any "maybes" won't be good enough for this to happen.

1 KUSTOM_FTO
2 Evoman
3 Zuihoujueding
4 MH999?
5 DR390
6 Storm Hawk
7 Storm Hawk
8 bass_twitch?
9

On another note, thanks to John, I will be getting a before and after dyno done this weekend to see what sort of gains you can get just from hooking this pipe up with the stock box, so will keep everyone informed for interests sake.

[storm hawk]

I,m 100% for 2 pipes only. Delivery to Seven Hills
MUST BE THIS YEAR DELIVERY or all bets off.

[MH999]

Hey im out i got a red one when i emailed him around a week ago he said he had two red ones left.

[dr390]

hey is it cash on the spot straight away say if it does go through?
or say if they do make it, can we pick it up anytime?

[bass_twitch]

I'm looking at a solid 85% in now (I know you need 100%s, but I'm just waiting for an email back from UAS atm about the UAS box..)
I know you can build them yourself, but I figured if I can get one already made for not too much, then that may be better

[bass_twitch]

Ok so I'm in:
Updated list:

1 KUSTOM_FTO
2 Evoman
3 Zuihoujueding
4 DR390
5 Storm Hawk
6 Storm Hawk
7 bass_twitch
8
9

Come on guys! please two more people! I really want this pipe

[Kustom]

Evoman, is that your car in the first post of this thread?
If so... do you have the template for that box

[Domo]

I heard they stopped making these? I want one !

Include me in. The full kit includes the box too right?

[bass_twitch]

Ok so including Domo, we only need one more guys!!
Updated list:

1 KUSTOM_FTO
2 Evoman
3 Zuihoujueding
4 DR390
5 Storm Hawk
6 Storm Hawk
7 bass_twitch
8 Domo
9

P.S Domo you realise this group buy is only for the pipe yeh?

[storm hawk]

The full kit is available but they need to make the rubber piece in this Group buy first.The other parts will be add to people rubber to make full kit. At additional price.Is my understanding ,correct me if I'm wrong.

[JOeJOe]

Sorry for the hijack, I will have the UAS filter and box for sale very soon. If anyone wants it just make an offer. Will be in the 'for sale' section in a couple of weeks.

[storm hawk]

Sorry for the hijack, I will have the UAS filter and box for sale very soon. If anyone wants it just make an offer. Will be in the 'for sale' section in a couple of weeks.

Is it pink. If it's for a mivec Interested,Only need the rubber but there other player looking for full kit.Can pick up COD folding.