DIY Day 14th of August.

Cruises, Meeting's and State Specific Information

Moderators: IMC, Club Staff

Post Reply
User avatar
aza013
NSW Coordinator
Posts: 9087
jedwabna poszewka promocja
Joined: Mon Mar 26, 2007 5:00 pm
Location: The Shire
Contact:

DIY Day 14th of August.

Post by aza013 »

OK it's time to get this going :D
These days are set up for members that need help getting things done to their cars at 1/2 the cost that it would be if you took it to a mechanic.
Dates and location will be posted up at a later date as this is still being worked out.

So at this time what I am looking for is a list of names that are interested and what you need done.
Oh and one thing we will not be doing is angle eyes no ifs or butts!

On the day you will need to bring:-
parts that you want changed/fixed
oils and plugs and things like that if in need of a service
and the normal 6 pack- box beer or bourbon :twisted: this comes down to the job that is needed to be done.

So lets start the list :D
User avatar
Tippin
Oldtimer
Posts: 1663
Joined: Wed Feb 27, 2008 6:00 pm
Location: Sydney

Re: DIY Day

Post by Tippin »

1) Tippin - Headlight delamination fix + HID's
User avatar
AJ
Oldtimer
Posts: 2991
Joined: Tue Nov 18, 2003 6:00 pm
Location: Sydney
Contact:

Re: DIY Day

Post by AJ »

1) Tippin - Headlight delamination fix + HID's
2) AJ - Air con pully replaced, adjust tappets (what do I need and where do I get it?)
User avatar
Astron_Boy
Trolling Gen Y
Posts: 8400
Joined: Sun May 27, 2007 5:00 pm
Location: Wine Country NSW
Contact:

Re: DIY Day

Post by Astron_Boy »

1) Tippin - Headlight delamination fix + HID's
2) AJ - Air con pully replaced, adjust tappets (what do I need and where do I get it?)
3) Astron Boy - Nothing, will be helping out.
Image
User avatar
rock_it
Oldtimer
Posts: 6599
Joined: Sun Jun 10, 2007 5:00 pm
Location: The Shire .. NSW
Contact:

Re: DIY Day

Post by rock_it »

1) Tippin - Headlight delamination fix + HID's
2) AJ - Air con pully replaced, adjust tappets (what do I need and where do I get it?)
3) Astron Boy - Nothing, will be helping out.
4) Tapets adjusted. Heads up display to be installed.. Sub and amp to install..
I just had to add it ......
sublime19 wrote:Lol clearly you don't know me well enough, it was a joke :roll:
I talk a lot of sh*t, usually have to keep a roll of toilet paper handy in the car for my mouth :lol:
Astron_Boy wrote:Hold me Sooty, I need man comfort.
:utbnb:
User avatar
Lawso
Penis Fingers
Posts: 2458
Joined: Sat Apr 05, 2008 5:00 pm
Location: Canberra
Contact:

Re: DIY Day

Post by Lawso »

1) Tippin - Headlight delamination fix + HID's
2) AJ - Air con pully replaced, adjust tappets (what do I need and where do I get it?)
3) Astron Boy - Nothing, will be helping out.
4) Tapets adjusted. Heads up display to be installed.. Sub and amp to install..
5) Lawsochap - iunno...probably will need something done though
Image
User avatar
FTO-BOY
Mechanic
Posts: 454
Joined: Sat Mar 13, 2010 6:00 pm
Contact:

Re: DIY Day

Post by FTO-BOY »

1) Tippin - Headlight delamination fix + HID's
2) AJ - Air con pully replaced, adjust tappets (what do I need and where do I get it?)
3) Astron Boy - Nothing, will be helping out.
4) Tapets adjusted. Heads up display to be installed.. Sub and amp to install..
5) Lawsochap - iunno...probably will need something done though
6) FTO-Boy - Spark plugs, Change auto tranny oil, change suspension spring, replace front sway bar and droplinks... INSTALL ANGEL EYES :D
User avatar
SchumieFan
Oldtimer
Posts: 5875
Joined: Thu Aug 05, 2004 5:00 pm
Location: GPS signal lost
Contact:

Re: DIY Day

Post by SchumieFan »

FTO-BOY wrote: 6) FTO-Boy - Spark plugs, Change auto tranny oil, change suspension spring, replace front sway bar and droplinks... INSTALL ANGEL EYES :D
thats fine, just no angle eyes
Image
User avatar
Gholdwayne
Oldtimer
Posts: 2657
Joined: Mon Dec 22, 2008 6:00 pm
Location: The edge of Woodcroft. Edgewood!
Contact:

Re: DIY Day

Post by Gholdwayne »

1) Tippin - Headlight delamination fix + HID's
2) AJ - Air con pully replaced, adjust tappets (what do I need and where do I get it?)
3) Astron Boy - Nothing, will be helping out.
4) Tapets adjusted. Heads up display to be installed.. Sub and amp to install..
5) Lawsochap - iunno...probably will need something done though
6) FTO-Boy - Spark plugs, Change auto tranny oil, change suspension spring, replace front sway bar and droplinks... INSTALL ANGEL EYES :D
7) Gholdwayne - Only if people are willing and it can be done on the day, but i would like my tappets adjusted. heheh also match coilover ride height (driver side is
slightly lower, maybe up to 5mm lower). Wonder if i can have someone help me install an oil press/temp and air fuel gauges. heheh wishful there.




i did not setup the coilovers i swear! its "Iced", he's a member on here, he installed my coilovers and set them up, awesome dood.
97 GPX Icelle Blue

I cant stop driving her!
...and when im not, im looking at her!
... ...and when im not, im freakin thinking about her!

FTO[For The Orgasm]
like For The Win!, but more hardcore...
User avatar
bass_twitch
Oldtimer
Posts: 2423
Joined: Thu May 27, 2010 3:37 pm
Location: Western Sydney, NSW

Re: DIY Day

Post by bass_twitch »

) Tippin - Headlight delamination fix + HID's
2) AJ - Air con pully replaced, adjust tappets (what do I need and where do I get it?)
3) Astron Boy - Nothing, will be helping out.
4) Tapets adjusted. Heads up display to be installed.. Sub and amp to install..
5) Lawsochap - iunno...probably will need something done though
6) FTO-Boy - Spark plugs, Change auto tranny oil, change suspension spring, replace front sway bar and droplinks... INSTALL ANGEL EYES
7) Gholdwayne - Only if people are willing and it can be done on the day, but i would like my tappets adjusted. heheh also match coilover ride height (driver side is
slightly lower, maybe up to 5mm lower). Wonder if i can have someone help me install an oil press/temp and air fuel gauges. heheh wishful there.
8 ) Bass_Twitch - Headlight Restoration... they are gross and gunky.. and maybe replacing my passenger mirror's engine as it does not fold in *tear*.. Can also help out with the sub and amp installation :)
Image
User avatar
Bennoz
National President
Posts: 23668
Joined: Fri Jan 21, 2005 6:00 pm
Location: Sydney
Contact:

Re: DIY Day

Post by Bennoz »

Fkn hell... Im gonna have a sore back after this one 8O

For this much mechanical stuff, we'll need to do it at my place, which is fine I'd already put my hand up for that, as we'll need the compressor & air tools.
User avatar
Kustom
Oldtimer
Posts: 6144
Joined: Sun Oct 04, 2009 5:00 pm
Location: Brisbane

Re: DIY Day

Post by Kustom »

Poor ben...... :lol:

Thats what you get for being good at what you do and yeah

Whereas i'll just ask a few questions and you'll give up and do eeeeeet.
Image
Taz wrote:When funds allow
User avatar
Tippin
Oldtimer
Posts: 1663
Joined: Wed Feb 27, 2008 6:00 pm
Location: Sydney

Re: DIY Day

Post by Tippin »

Bennoz wrote:which is fine I'd already put my hand up for that, as we'll need the compressor & air tools.
i was gonna say that i could bring my compressor for all the mechanical work but id need someone with a ute to pick it up or something...

thanks bennoz :cheers:
User avatar
aza013
NSW Coordinator
Posts: 9087
Joined: Mon Mar 26, 2007 5:00 pm
Location: The Shire
Contact:

Re: DIY Day

Post by aza013 »

Bennoz wrote:Fkn hell... Im gonna have a sore back after this one 8O

For this much mechanical stuff, we'll need to do it at my place, which is fine I'd already put my hand up for that, as we'll need the compressor & air tools.
I was going to ring you on the weekend to ask you about that lol.
User avatar
bass_twitch
Oldtimer
Posts: 2423
Joined: Thu May 27, 2010 3:37 pm
Location: Western Sydney, NSW

Re: DIY Day

Post by bass_twitch »

Ok so do we have any inklings towards a date in mind? Or am I blind and the date is already established?
Image
User avatar
aza013
NSW Coordinator
Posts: 9087
Joined: Mon Mar 26, 2007 5:00 pm
Location: The Shire
Contact:

Re: DIY Day

Post by aza013 »

I will post up a date over the weekend as I want to work it out with Ben to find out the best date to have it.
User avatar
FTO-BOY
Mechanic
Posts: 454
Joined: Sat Mar 13, 2010 6:00 pm
Contact:

Re: DIY Day

Post by FTO-BOY »

just a request.. can it not be on a sunday?
User avatar
bass_twitch
Oldtimer
Posts: 2423
Joined: Thu May 27, 2010 3:37 pm
Location: Western Sydney, NSW

Re: DIY Day

Post by bass_twitch »

no no, can it please be a sunday!
Image
User avatar
FTO-BOY
Mechanic
Posts: 454
Joined: Sat Mar 13, 2010 6:00 pm
Contact:

Re: DIY Day

Post by FTO-BOY »

Dont really mind which day.. just that sunday i have soccer but i can come before the game or after depending on the time of game. or i can even not go to the game. just depending whether the team is easy or hard.
User avatar
Tippin
Oldtimer
Posts: 1663
Joined: Wed Feb 27, 2008 6:00 pm
Location: Sydney

Re: DIY Day

Post by Tippin »

FTO-BOY wrote:Dont really mind which day.. just that sunday i have soccer but i can come before the game or after depending on the time of game. or i can even not go to the game. just depending whether the team is easy or hard.
same for me :lol: except i cant miss the game
Post Reply