Page 4 of 8
Posted: Sat Feb 11, 2006 9:27 am
by scarecrow
Sounds good, try and find out how it's going to be installed (ie. will it still use factory clip locations?).
Posted: Sat Feb 11, 2006 8:19 pm
by NobbyV4
I know a few ppl would be interested in these on the UK site, I would. Is there going to be another GB on this and if so let me know and I'll post an EOI thread on the UK site (need to find out about postage though), cheers
V
Posted: Sun Feb 12, 2006 8:59 pm
by rnbboi
Nobby - Hi
I doubt there'll be another GB on this in AUS. However, if there is enuff interest in the UK, I can always speak to my supplier and see what he says.
...postage will be a hassle though
Posted: Sun Feb 12, 2006 11:56 pm
by NobbyV4
Ok, Do you have some hi quality pics of a finished surround?
Posted: Mon Feb 13, 2006 9:41 am
by rnbboi
hahaz - wait in line nobby
am going to my supplier this weds to trial fit everything before its sent off to everyone in the GB.
ill be taking fotos of it then, and will post em up asap.
thanx
Posted: Mon Feb 13, 2006 11:02 am
by shue
hey ken, pack em all together in one big box and send them thru sea freight. cost me 400$ to send a bonnet to jay. should be cheaper than that for say 20 -30 surrounds.
Posted: Tue Feb 14, 2006 9:25 am
by NobbyV4
rnbboi wrote:hahaz - wait in line nobby
am going to my supplier this weds to trial fit everything before its sent off to everyone in the GB.
ill be taking fotos of it then, and will post em up asap.
thanx
Ah. a little ahead of myself there I see. I thought this was a completed GB sorry. I await the cool pics though
Posted: Wed Feb 15, 2006 11:29 am
by scarecrow
Show us some piccieees!
Posted: Wed Feb 15, 2006 2:09 pm
by rnbboi
Kz. Went down to my supplier today and trialed fit the surround, and checked out the mould etc etc.
everythings going good. heres a rough/trial cf surround - hence why its not polished and does not have the hole yet (thought ill tell u guys that before u all bite my head off).
in another few days the final product will be done and by end of next week, it should be sent out to u guys.
as to how it will fit:
the top 2 clips will exist and goes into your factory holes. the bottom part will require double sided tape so its stable. i trialed fit it without the tapes and it sits fine.
However for those who drive manuals i found out that theres no place to screw your leather bit back on like the factory ones, so u might have to glue it or something (Im sure doubled sided tape will work wonders as well lol).
Tiptronic/auto will have no problems.
As for other CF parts:
Top centre console is
impossible
Door Cups [/b]can be made
with minor adjustments
****************
Depending on how much interest I can get for door cups, I can get em made. Again, I will need at least 5min interest in order for this to happen.
Price: $80 a pair
Postage: TBA
- Ken
Posted: Wed Feb 15, 2006 6:02 pm
by scarecrow
If possible I'd like mine without the cigarette hole, and clearcoated (you know, so it's shiney). Let me know. Looks really good at this stage but! I'm impressed.
Posted: Wed Feb 15, 2006 6:31 pm
by BuCkEt
Personally I think it looks better without the cigarette lighter hole.
Any chance we can just leave it out? It's not like I smoke or anything.
Posted: Wed Feb 15, 2006 6:39 pm
by TimmyD
alhough im a non smoker, i'd like my cig lighter to be there, just incase.
Oh, and i would like to charge my ipod with it.
Posted: Wed Feb 15, 2006 9:38 pm
by rnbboi
Kz... lol... I just spoke to my supplier and he said thats fine.
But what I now need is if u want NO HOLE, tell me NOW!!!
List your names here and write next to it hole or not:
So Far:
1. Bucket (no hole)
2. Scarecrow (no hole)
3. TimmyD (with hole)
please get your name here ASAP otherwise I will assume that u will want the hole.
U got 2 days to tell me (Sunday the latest guys)!
And yes scarecrow, the final product will look all shiny/polished -blinged blinged lol.
Thanx
- Ken
PS: I will list another EOI/Group buy for door cups late next week (so that this one is out of the way first) - so please be patient
Posted: Wed Feb 15, 2006 9:52 pm
by scarecrow
Excellent, great work mate.
Posted: Thu Feb 16, 2006 8:19 am
by Breza
List your names here and write next to it hole or not:
So Far:
1. Bucket (no hole)
2. Scarecrow (no hole)
3. TimmyD (with hole)
4. Breza (no hole)
Posted: Thu Feb 16, 2006 11:27 am
by Lenny
1. Bucket (no hole)
2. Scarecrow (no hole)
3. TimmyD (with hole)
4. Breza (no hole)
5. Lenny (no hole thanks)
Posted: Thu Feb 16, 2006 1:11 pm
by Leigh
PostPosted: Thu Feb 16, 2006 11:27 am Post subject:
1. Bucket (no hole)
2. Scarecrow (no hole)
3. TimmyD (with hole)
4. Breza (no hole)
5. Lenny (no hole thanks)
6. Leigh (no hole)
Posted: Thu Feb 16, 2006 5:19 pm
by shue
man those are lookin
if only i had the money . im going to be hassling u soon for these ken
Posted: Thu Feb 16, 2006 6:14 pm
by TimmyD
lol im the only one that wants the cig lighter there!
wooo im different
Posted: Thu Feb 16, 2006 10:29 pm
by SG
1. Bucket (no hole)
2. Scarecrow (no hole)
3. TimmyD (with hole)
4. Breza (no hole)
5. Lenny (no hole thanks)
6. Leigh (no hole)
7. SG (no hole)
no hole for me, but i'm still keeping the cigarate lighter i think.. just going to move it somewhere so i can still use accessories if need b
