FTO AUSTRALIA

So how much would we get off the extractors if we trade in?

Thanks for that Grue... I was way too tired to do it myself.

As you can see some of the items are now substantially cheaper..
i.e. instead of $704 for the engine mounts, works out to be $548!!!


So this is officially running!

Just log onto www.rpw.com.au and place your order.

Make a note that its for the FTO Australia Group Buy and viola!

Easy peasy Japaneesy... Any QLD members are welcome to have their gear shipped with my engine to cut down on postage costs...


So get to it guys and start ordering!!


You have a few weeks to get your order in before it will close. So dont delay.

eThix wrote:So how much would we get off the extractors if we trade in?

2nd hand extractors would be worth nothing. Better off selling privately for $50 or donating to the FTO Aus Scrap Yard

No worries Sam, sat at work with nothing better to do! Except work of course...

Thanks for setting this up mate.

Thats no problems.. If it wasnt for this club i would have been ripped off by a lot more mechanics.. so its good to try and help everyone else out as well.

Also. When you place your order post up on here the details, including what parts were ordered etc, so i may keep track of everything as well..

Also please let me know if u wish to have your goods delivered to qld with my engine.

The sooner you place your order the sooner you get your parts... So get going and get ordering...

hmmm... You can choose from Rally Spec or Standard Spec when adding short shifter to the cart?

Choose Rally Spec... Std is just a normal shifter i thinks...

Qty: 1
Name: Performance Polyurethane Motor & Transmission Mounts
SKU: Mount-Polyurethane
Price: $176.00
Total: $176.00

Subtotal: $176.00
Shipping: $27.50
Tax Total: $16.00
Total: $203.50

Customer Note:
Part of the FTO Australia Group Buy.

Engine mount required is the FRONT engine mount.

Ordered, now what

I spose they'll email you with further details...

Let me know if u need me to follow it up..

I'm confused...how much are the RPW extractors with the polished silver coating? Im to tired to understand all the stuff on page 3

Im a little confused as well. If you look at the RDA slotted rotors on the RPW site, they are advertising at $252.73 per pair (for GR/GPX) and $272 for Mivec FTO. But a GPX is a mivec FTO and the 2 quoted prices are for discs that are different diameters.
http://www.rpw.com.au/shop/index.php?op ... ct_id=1249

Both prices ($252.73 & $272) seems to be less than the $137 per disk we are being quoted. Is there a mistake here or am I missing something obvious

Well i know that most of their pricing has been out of whack for a while.

So you'll have to ignore the prices on there...

Will shoot david an email to come here and answer your questions.

With regards to pricing on our website, firstly the pricong on there does not show GST until you log into the website with your address details becuse the website is an international one.

Also the prices on the website are not updated constantly, I just don't have that much time so they are not always accurate. Prices qouted for the FTO group buy include GST.

There will always be minor items on the website whose pricing is not accurate at the time, hence why our website does not generate an invoice, only a purchase order form so that if the price needs correcting, it can be done so and confirmed with the customer first before purchasing.

The RPW Extractors with ceramic coatings was placed on the PDF File qoute, but to re state it again

Coating - headers only (Each) $140.00 each
Coating - Complete system incl headers & Flex pipe $330.00

Thanks david... much appreciated... saves me being a repeater...

hi guys...before i place order...could anyone solve a couple of questions for a novice

i am thinking to order the followings:


Parts.
1.00 Engine Mount x 4
2.00 Ignition Lead Set
3.00 Brake Master Cylinder 1" Bore
4.00 Clutch ASSY S/SC $420 Kit
5.00 Extractor System (3in1 Racing)
6.00 FTO Manifold & 65mm Upgrade
Total Parts: $Scary

Is the 65mm manifold a direct replacement of the stock one...anything else required to fit??

Is the Clutch assembly a good upgrade for my 95 GPX TIPTRONIC?? (or is this only for manual). i read somewhere that a stock clutch would last approx. 100k, and my car is almost 90k and i am thinking to go UAS in September for a major service. thought might as well get everything i need now and throw everything to UAS when i do my major service with water pump, sparkies etc etc while they need to almost empty the engine bay.

please anyone...

Thanks. Richy

If you have a tiptronic, you do not have a clutch...

Also, Can I assume that Whiteline Strut Braces are included in this GB? Also, does a bigger discount apply? Or just the usual (which is around 10% already)

e.g. KSB578A - Front Strut Brace
& KSB526 - Rear Strut Brace

KSB578A - Front Strut Brace - $175.00 (1 in stock this moment but I can order more)
KSB526 - Rear Strut Brace $175 (5 in stock this moment)

OK Sam, just put my order in with RPW (Front Rotors and extractors).

Re the extractors, the 3 in one race system is the right one isnt it......

[edit]Just looking at the price list again. Do I need the flex pipe as well or does that come with the extractors......[/edit]