Just spotted that myself, fixed nowbjk wrote:$!00 AUD!
As seen on Ebay
Moderators: IMC, Club Staff
- HiRAEdd
- Mechanic
- Posts: 689
- jedwabna poszewka promocja
- Joined: Mon Mar 22, 2004 6:00 pm
- Location: Woody Point, Queensland
- Contact:
Re: As seen on Ebay
- spetz
- Oldtimer
- Posts: 2915
- Joined: Wed Mar 03, 2004 6:00 pm
Re: As seen on Ebay
Not sure if a repost, bus 8:1 forged pistons for the FTO:
http://www.gumtree.com.au/s-ad/georges- ... 1100371660
EDIT:
And rods:
http://www.gumtree.com.au/s-ad/georges- ... 1100370374
http://www.gumtree.com.au/s-ad/georges- ... 1100371660
EDIT:
And rods:
http://www.gumtree.com.au/s-ad/georges- ... 1100370374
- bjk
- Totes
- Posts: 5746
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: As seen on Ebay
Bargain for what they are.spetz wrote:Not sure if a repost, bus 8:1 forged pistons for the FTO:
http://www.gumtree.com.au/s-ad/georges- ... 1100371660
EDIT:
And rods:
http://www.gumtree.com.au/s-ad/georges- ... 1100370374
Rob?
- Vectose
- Forum Moderator
- Posts: 3947
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: As seen on Ebay
Meh.
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
-
- Grease Monkey
- Posts: 169
- Joined: Fri Nov 15, 2013 11:35 am
- Location: UK
Re: As seen on Ebay
I managed to pick up a facelift front bumper for the equivalent AUD$87 delivered and an ARC induction box for AUD$210 delivered.
- bjk
- Totes
- Posts: 5746
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: As seen on Ebay
Bargain!MaxD wrote:I managed to pick up a facelift front bumper for the equivalent AUD$87 delivered and an ARC induction box for AUD$210 delivered.
- bjk
- Totes
- Posts: 5746
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: As seen on Ebay
Intradasting. Shame the front one doesn't clear the RPW Y-pipe, maybe have to get a custom one made up. rear one is tempting too. Same position as the Project F one anyone know?
http://www.rhdjapan.com/cusco-lower-arm ... bishi.html
http://www.rhdjapan.com/cusco-lower-arm ... bishi.html
http://www.rhdjapan.com/cusco-lower-arm ... bishi.html
http://www.rhdjapan.com/cusco-lower-arm ... bishi.html
- Vectose
- Forum Moderator
- Posts: 3947
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: As seen on Ebay
Wonder if it'll clear my turbo piping....
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
- bjk
- Totes
- Posts: 5746
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: As seen on Ebay
Sidds-buy?Vectose wrote:Wonder if it'll clear my turbo piping....
-
- Grease Monkey
- Posts: 169
- Joined: Fri Nov 15, 2013 11:35 am
- Location: UK
Re: As seen on Ebay
The bargains don't end there.bjk wrote:Bargain!MaxD wrote:I managed to pick up a facelift front bumper for the equivalent AUD$87 delivered and an ARC induction box for AUD$210 delivered.
I'm just about to pay AUD$280 for a set of 4x 16" Super Advan SA3R alloys to be delivered end of the week. AUD$100 of that is the shipping! They need a little work to bring back to life, but include everything - no missing parts! They also come with tyres which have 6mm of tread all round.
- bjk
- Totes
- Posts: 5746
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: As seen on Ebay
Only 16s but.MaxD wrote:The bargains don't end there.bjk wrote:Bargain!MaxD wrote:I managed to pick up a facelift front bumper for the equivalent AUD$87 delivered and an ARC induction box for AUD$210 delivered.
I'm just about to pay AUD$280 for a set of 4x 16" Super Advan SA3R alloys to be delivered end of the week. AUD$100 of that is the shipping! They need a little work to bring back to life, but include everything - no missing parts! They also come with tyres which have 6mm of tread all round.
Where are you finding these?
-
- Grease Monkey
- Posts: 169
- Joined: Fri Nov 15, 2013 11:35 am
- Location: UK
Re: As seen on Ebay
I like the 16" original size. It might have something to do with the lowered stance and the small fortune I spent on my calipers. But it's mainly down to wanting to look standard, but be different.bjk wrote:Only 16s but.MaxD wrote:The bargains don't end there.bjk wrote:Bargain!MaxD wrote:I managed to pick up a facelift front bumper for the equivalent AUD$87 delivered and an ARC induction box for AUD$210 delivered.
I'm just about to pay AUD$280 for a set of 4x 16" Super Advan SA3R alloys to be delivered end of the week. AUD$100 of that is the shipping! They need a little work to bring back to life, but include everything - no missing parts! They also come with tyres which have 6mm of tread all round.
Where are you finding these?
As for finding deals, I'm very good at research.
It's probably worth mentioning I picked up a pair of alloy seat belt guides a couple of years ago for AUD$200 delivered, alloy door cups for AUD$50 delivered and a number of others for not much. I like the rare parts.
- bjk
- Totes
- Posts: 5746
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: As seen on Ebay
Each to their own I suppose! 16 is too small for me (unless they were wide haha). What calipers are those?
Rare bits are always nice!
Rare bits are always nice!
-
- Grease Monkey
- Posts: 169
- Joined: Fri Nov 15, 2013 11:35 am
- Location: UK
Re: As seen on Ebay
Standard OEM, just stripped down, rebuilt and professionally painted. Not the best photo's in the world as they're a super gloss finish and it doesn't show:bjk wrote:Each to their own I suppose! 16 is too small for me (unless they were wide haha). What calipers are those?
Rare bits are always nice!
The Advans will be my summer wheels and the OEM's will be my winter wheels with associated tyres.
Last edited by MaxD on Mon May 02, 2016 6:56 pm, edited 2 times in total.
-
- 9.5"
- Posts: 6793
- Joined: Tue Oct 13, 2009 5:00 pm
Re: As seen on Ebay
You could get some longer bolts and some solid spacers for the braces?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Vectose
- Forum Moderator
- Posts: 3947
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: As seen on Ebay
Can't, the front mounting points bolt to the front bolts of the LCA which are in a horizontal orientation.
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?
- Bennoz
- National President
- Posts: 23668
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
Re: As seen on Ebay
Was gonna say ^^^
Can't be much in it though. I've got custom piping all under mine, with 2 dumps going into a 3" pipe, none of it hits the H brace. If it does, just get a bigger hammer!
Can't be much in it though. I've got custom piping all under mine, with 2 dumps going into a 3" pipe, none of it hits the H brace. If it does, just get a bigger hammer!
- bjk
- Totes
- Posts: 5746
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: As seen on Ebay
Good ol' hammer.Bennoz wrote:Was gonna say ^^^
Can't be much in it though. I've got custom piping all under mine, with 2 dumps going into a 3" pipe, none of it hits the H brace. If it does, just get a bigger hammer!
- bjk
- Totes
- Posts: 5746
- Joined: Tue Oct 04, 2011 1:34 pm
- Location: Adelaide
Re: As seen on Ebay
Wonder if this is a Version R or not. No stickers, but the seats are red...
http://www.gumtree.com.au/s-ad/west-per ... 1120163682
http://www.gumtree.com.au/s-ad/west-per ... 1120163682
- Vectose
- Forum Moderator
- Posts: 3947
- Joined: Sun Nov 28, 2010 8:45 pm
- Location: Newcastle
Re: As seen on Ebay
Yup, it's a Version R. Got manual air con.
Bennoz wrote:A whoooole lot 'o jismTechnikhaus wrote:What is in said Bens big penis by the way?