Loads of Aftermarket Parts for Sale

Private Sales Only - No Traders Allowed!
Please Post:
* Picture if possible
* Details
* Price
* State

Moderators: IMC, Club Staff

Post Reply
User avatar
mr-charisma
Oldtimer
Posts: 4020
jedwabna poszewka promocja
Joined: Wed Jul 06, 2005 5:00 pm
Location: Brisbane, Australia

Loads of Aftermarket Parts for Sale

Post by mr-charisma »

I am cleaning out the garage and have quite a few things for sale;

Whiteline Front Strut brace - Brand new never fitted $160
Image

Whiteline Rear Strut brace - Near new $160
Image

2.5" "Zetti" brand Hi Flow 200CPSI Metal Cat - Brand new never fitted $140
Image

2.5 Inch CAT Back Fujitsubo Stainless Steel Mandrel Bent exhaust - used GC $800 ONO
Image
Image

Mivec Air Fuel Controller "Field" brand - Used GC $60
Image

Unichip Type A - Good for about 10-20kw power increase I think, but there should be plenty of posts about results if you search through the forum $250 - FIRM
Image

Alpine CDA-9887 Head Unit - Audiophile Quality! - New in Box $350 Or nearest reasonable offer (Awesome unit .. if it doesn't sell I'll be using it in my setup)
http://www.alpine.com.au/showItem.php?item_id=40
Image

Alpine V12 AMP - MRV-F345 - brand new in box, never used - $250 ONO
Description:
The V12 Amplifier series feature the same high-grade power transistors and 3-stage Darlington circuit as the premium Alpine F#1 Status amplifier. With the MRV-F345, you don't have to worry about your amp overheating or shutting down at high power levels, thanks to an extremely effective thermal management system. V12 Amplifiers not only allow better channel separation for improved sound imaging and staging, they come with a sleek silver design with blue LCD information display (voltage, current, temperature, etc.), This is a flexible amp addition to complete any system! The MRV-F345 is compatible with the amplifier link unit. Now you can connect any amplifier link ready 2005 head unit to the MRV-F345 (KCE-511M required).

Audio SystemSignal-To-Noise Ratio 96 dB
Continuous Power / Channel Qty 75 Watts x 4
Amplifier Output Details 75 Watt - 4 Ohm - 20 - 20000 Hz - THD 0.3% - 14.4V DC - 4 channel(s) ¦ 150 Watt - 2 Ohm - 20 - 20000 Hz - THD 1.0% - 14.4V DC - 4 channel(s)
Image

Braided Brake Lines -Brand new never fitted $100

FTO 'GR' Stock MAF (Mass Air Flow) Unit - OFFERS
Image

FTO Horn - OFFERS
Image

Muffler Exhaust Tip - OFFERS
Image

Pod Air Filter - OFFERS
Image


Pickup available from Brisbane or Gold Coast area - additional costs if posting
Please PM with any questions :)
Last edited by mr-charisma on Wed Oct 24, 2012 5:59 pm, edited 2 times in total.
User avatar
Sahin
HULK
Posts: 5518
Joined: Wed Oct 05, 2011 10:38 pm
Location: Up to me nuts in boys guts

Re: Loads of Aftermarket Parts for Sale

Post by Sahin »

Dubs on brake lines
silverGPX
9.5"
Posts: 6793
Joined: Tue Oct 13, 2009 5:00 pm

Re: Loads of Aftermarket Parts for Sale

Post by silverGPX »

hmmmm when funds allow


Sent from my iPhone using Tapatalk
User avatar
ZFL45H1
Oldtimer
Posts: 1830
Joined: Sun Feb 07, 2010 6:00 pm
Location: Albury

Re: Loads of Aftermarket Parts for Sale

Post by ZFL45H1 »

silverGPX wrote:hmmmm when funds allow

+1
Interested in rear strut brace
gotta get there one day :)
User avatar
den0va
Grease Monkey
Posts: 215
Joined: Wed May 02, 2012 9:19 pm
Location: Bowen, Queensland

Re: Loads of Aftermarket Parts for Sale

Post by den0va »

Interestged in front and rear strut braces... Of course that is if ZFL45H falls through with the rear, if so I'll take the front. :D Funds are ready whenever...
User avatar
ZFL45H1
Oldtimer
Posts: 1830
Joined: Sun Feb 07, 2010 6:00 pm
Location: Albury

Re: Loads of Aftermarket Parts for Sale

Post by ZFL45H1 »

Mate take both iv had a change of plans and funds won't be ready anytime soon for it so all yours champ
gotta get there one day :)
User avatar
mr-charisma
Oldtimer
Posts: 4020
Joined: Wed Jul 06, 2005 5:00 pm
Location: Brisbane, Australia

Re: Loads of Aftermarket Parts for Sale

Post by mr-charisma »

silverGPX wrote:hmmmm when funds allow


Sent from my iPhone using Tapatalk
I'll just put you down for the lot then :lol:
User avatar
mr-charisma
Oldtimer
Posts: 4020
Joined: Wed Jul 06, 2005 5:00 pm
Location: Brisbane, Australia

Re: Loads of Aftermarket Parts for Sale

Post by mr-charisma »

den0va wrote:Interestged in front and rear strut braces... Of course that is if ZFL45H falls through with the rear, if so I'll take the front. :D Funds are ready whenever...
PM'd
User avatar
Sahin
HULK
Posts: 5518
Joined: Wed Oct 05, 2011 10:38 pm
Location: Up to me nuts in boys guts

Re: Loads of Aftermarket Parts for Sale

Post by Sahin »

Pm me about brake lines can pickup from Brisbane and are they fronts or rears or both?
User avatar
mr-charisma
Oldtimer
Posts: 4020
Joined: Wed Jul 06, 2005 5:00 pm
Location: Brisbane, Australia

Re: Loads of Aftermarket Parts for Sale

Post by mr-charisma »

Sahin wrote:Pm me about brake lines can pickup from Brisbane and are they fronts or rears or both?
PM'd
User avatar
PHIL069
Oldtimer
Posts: 4719
Joined: Sun Sep 20, 2009 5:00 pm
Location: Central Coast > South Australia

Re: Loads of Aftermarket Parts for Sale

Post by PHIL069 »

mr-charisma wrote:Mivec Air Fuel Controller "Field" brand - Used GC $60
Image
Is this any good?
I have done some research.....
Would tricking the MAP sensor to allow moar fuel make the engine run too rich, in turn damaging the bores/pistons/valves?
Does changing MIVEC cut in point to a lower RPM actually give quicker or slower acceleration, and does it lower the RPM upper limit (red line)?
Does it come with wire harness and instructions?
mikeey01nzl wrote:Hats off to you too Phil for spending so much time on the phone trying to help someone out, your a top man and only a few would've spent so much time. well done! :salut:
Daniel2019 wrote:Come on phil, we bonded at the bonfire, lets be honest here...me and phil are besties now... :lol:
User avatar
Taz
Oldtimer
Posts: 3995
Joined: Wed Jan 05, 2011 11:50 am
Location: Your mothers house

Re: Loads of Aftermarket Parts for Sale

Post by Taz »

It has been researched, and proven that Mitsubishi got it right the first time round. 5500 is the ideal mivec kick in, any less amd you'll lose power.

also - no it wont lower the RPM limit when you lower the mivec - mivec doesnt only go for a specific RPM band, it just kicks in when it is told to and stops when it is told to :lol:
It will probably trick the engine into thinking that it is running rich and lean at the same time - so as well as more fuel it will tell it to let more air through as well? hell i dunno im just taking a wild guess here
Image
Bennoz wrote: Cum gunt it!
User avatar
mr-charisma
Oldtimer
Posts: 4020
Joined: Wed Jul 06, 2005 5:00 pm
Location: Brisbane, Australia

Re: Loads of Aftermarket Parts for Sale

Post by mr-charisma »

Taz wrote:It has been researched, and proven that Mitsubishi got it right the first time round. 5500 is the ideal mivec kick in, any less amd you'll lose power.

also - no it wont lower the RPM limit when you lower the mivec - mivec doesnt only go for a specific RPM band, it just kicks in when it is told to and stops when it is told to :lol:
It will probably trick the engine into thinking that it is running rich and lean at the same time - so as well as more fuel it will tell it to let more air through as well? hell i dunno im just taking a wild guess here
Correct, not recommended to change the Mivec point, but it does give some additional tuning options for Air/Fuel Control which can come in quite handy :)
User avatar
ZFL45H1
Oldtimer
Posts: 1830
Joined: Sun Feb 07, 2010 6:00 pm
Location: Albury

Re: Loads of Aftermarket Parts for Sale

Post by ZFL45H1 »

Would it be useful in a low boosted turbo setup
gotta get there one day :)
User avatar
mr-charisma
Oldtimer
Posts: 4020
Joined: Wed Jul 06, 2005 5:00 pm
Location: Brisbane, Australia

Re: Loads of Aftermarket Parts for Sale

Post by mr-charisma »

ZFL45H1 wrote:Would it be useful in a low boosted turbo setup
nah bud, you'll need something a bit beefier for a turbo setup
*edit* .. Unichip will do the job on a mild turbo install, boost control can be handled by an addon module
User avatar
Taz
Oldtimer
Posts: 3995
Joined: Wed Jan 05, 2011 11:50 am
Location: Your mothers house

Re: Loads of Aftermarket Parts for Sale

Post by Taz »

silverGPX wrote:hmmmm when funds allow


Sent from my iPhone using Tapatalk
1cf3838c.gif
1cf3838c.gif (354.26 KiB) Viewed 1091 times
Image
Bennoz wrote: Cum gunt it!
User avatar
Sahin
HULK
Posts: 5518
Joined: Wed Oct 05, 2011 10:38 pm
Location: Up to me nuts in boys guts

Re: Loads of Aftermarket Parts for Sale

Post by Sahin »

I'll offer $600 for the exhaust
User avatar
mr-charisma
Oldtimer
Posts: 4020
Joined: Wed Jul 06, 2005 5:00 pm
Location: Brisbane, Australia

Re: Loads of Aftermarket Parts for Sale

Post by mr-charisma »

I can do the full Exhaust system + the Cat converter for $800
User avatar
den0va
Grease Monkey
Posts: 215
Joined: Wed May 02, 2012 9:19 pm
Location: Bowen, Queensland

Re: Loads of Aftermarket Parts for Sale

Post by den0va »

Strut braces Front and Rear - SOLD :D
User avatar
mr-charisma
Oldtimer
Posts: 4020
Joined: Wed Jul 06, 2005 5:00 pm
Location: Brisbane, Australia

Re: Loads of Aftermarket Parts for Sale

Post by mr-charisma »

*bump*

i also have this for sale new, never fitted (pre-primed in black, not white as in picture);

Image

Offers..
Post Reply