Finally I have an FTO!!!!
Moderators: IMC, Club Staff
- evoman
- Grease Monkey
- Posts: 315
- jedwabna poszewka promocja
- Joined: Fri Oct 24, 2008 5:00 pm
- Location: Castle Hill, NSW
Finally I have an FTO!!!!
Hey everyone, you have no idea how happy I am to be finally making this post
After doing the hard yards and saving up for what feels like an eternity and then looking around for even longer, I have finally landed myself an FTO. Picked up a virtually stock(except wheels) white GPvR yesterday so I'm well chuffed.
You might guess from my username that I'm a bit of an evo nut, but I always wanted to start out in a FTO first.
I'm currently in Wollongong and have been seeing a lot more FTO's around this year (most recently FTO-99R's former car?) so it's good to know I'm not alone.
Really looking forward to hopfully getting to meet some of you!
PS. Someone please buy my rims.
After doing the hard yards and saving up for what feels like an eternity and then looking around for even longer, I have finally landed myself an FTO. Picked up a virtually stock(except wheels) white GPvR yesterday so I'm well chuffed.
You might guess from my username that I'm a bit of an evo nut, but I always wanted to start out in a FTO first.
I'm currently in Wollongong and have been seeing a lot more FTO's around this year (most recently FTO-99R's former car?) so it's good to know I'm not alone.
Really looking forward to hopfully getting to meet some of you!
PS. Someone please buy my rims.
- ftofionaaa
- Grease Monkey
- Posts: 154
- Joined: Tue Jan 13, 2009 6:00 pm
- Location: melbourne
- rock_it
- Oldtimer
- Posts: 6599
- Joined: Sun Jun 10, 2007 5:00 pm
- Location: The Shire .. NSW
- Contact:
- evoman
- Grease Monkey
- Posts: 315
- Joined: Fri Oct 24, 2008 5:00 pm
- Location: Castle Hill, NSW
Thanks for the welcome. I haven't had time to take any good photos yet, but here are a few I have.
You might notice it has Cusco adjustable camber plates, but is missing the front and rear strut braces which I assume were taken out during compliancing. Bastards. Will be looking to source some before too long.
Headunit and front speakers are also missing, but I didn't get this car to listen to normal music. No need when there is such a nice soundtrack already playing in the front
Still can't believe the dealer thought it was a GX Sports
You might notice it has Cusco adjustable camber plates, but is missing the front and rear strut braces which I assume were taken out during compliancing. Bastards. Will be looking to source some before too long.
Headunit and front speakers are also missing, but I didn't get this car to listen to normal music. No need when there is such a nice soundtrack already playing in the front
Still can't believe the dealer thought it was a GX Sports
- Bennoz
- National President
- Posts: 23674
- Joined: Fri Jan 21, 2005 6:00 pm
- Location: Sydney
- Contact:
- sublime19
- Sooty!
- Posts: 5036
- Joined: Sun Feb 12, 2006 6:00 pm
- Location: Sydney
Nice clean car, gratz on the buy and welcome
I have to work - People on the dole depend on me.
Bennoz wrote:Meet Subby. The class leader & originator of post whoring... Although most of Subbys posts have 'content'
Bennoz wrote:They especially hate bonnets, they frisbee across the road & behead a pedestrian.
- Astron_Boy
- Trolling Gen Y
- Posts: 8400
- Joined: Sun May 27, 2007 5:00 pm
- Location: Wine Country NSW
- Contact:
- aza013
- NSW Coordinator
- Posts: 9088
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
I was about to suggest the same thing. Welcome to the club and if you can make some time to get down to the bonfire on the weekend of the 4th April for the bonfire, that would be great
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Actually, this isnt an Aero is it. Its just that there was an Aero for sale when I got mine that had those rims on it.
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- evoman
- Grease Monkey
- Posts: 315
- Joined: Fri Oct 24, 2008 5:00 pm
- Location: Castle Hill, NSW
Interesting question, honestly I'm not sure mate, how can you tell if it is?dstocks wrote:Actually, this isnt an Aero is it. Its just that there was an Aero for sale when I got mine that had those rims on it.
The VIN Decoder just says it's a GPvR.
Also it was manufacured in June 97 and I have a vague recollection that I read somewhere once that the aero's didn't start until late '97?...although I could easily be wrong.
Where did you see the one that you are referring to? In a dealer a few years ago or more recently?
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
Japan. It was for sale when I was looking for mine. Ive now had mine about 18 months, so yeah, probably a couple of years ago. Do you still have the version R sticker on the back of the boot. There is normally an Aero sticker to the right of it if its an Aero. I would have thought the vin decoder would have picked it up as an Aero if it was one as well.Where did you see the one that you are referring to? In a dealer a few years ago or more recently?
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- evoman
- Grease Monkey
- Posts: 315
- Joined: Fri Oct 24, 2008 5:00 pm
- Location: Castle Hill, NSW
- dstocks
- National Vice President
- Posts: 9529
- Joined: Fri Jun 24, 2005 5:00 pm
- Location: Utopia
- Contact:
An Aero is pretty much a fully optioned out version R from what I have seen. There is nothing on it that wasnt available as an option from what ive found
Complete FTO (http://www.completefto.com.au/completefto.asp)
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
If you are trying to contact me and not getting a quick answer, its because im disorganised. Hassle me and ill get back to you
- aza013
- NSW Coordinator
- Posts: 9088
- Joined: Mon Mar 26, 2007 5:00 pm
- Location: The Shire
- Contact:
- zuihoujueding
- Oldtimer
- Posts: 1980
- Joined: Thu Aug 31, 2006 5:00 pm
- Location: Sydney
- evoman
- Grease Monkey
- Posts: 315
- Joined: Fri Oct 24, 2008 5:00 pm
- Location: Castle Hill, NSW
Great buy eh?....lol...I haven't even had it for a week and the bitch is playing up on me.
She suddenly decided that she didn't want to idle any more today which made for a tricky trip home as I'm not good enough with the heel/toeing to keep it alive all the time. Pretty damn annoying and weird considering it was fine for the last few days.
Anyway, I desperately wanted to start a new thread on stepper motors just to make you all happy but decided not to
I haven't been able to fully investigate yet but I guess it's probably the most likely thing. Hmmm, I wonder if the dealer warranty will cover a new stepper motor if needed.
She suddenly decided that she didn't want to idle any more today which made for a tricky trip home as I'm not good enough with the heel/toeing to keep it alive all the time. Pretty damn annoying and weird considering it was fine for the last few days.
Anyway, I desperately wanted to start a new thread on stepper motors just to make you all happy but decided not to
I haven't been able to fully investigate yet but I guess it's probably the most likely thing. Hmmm, I wonder if the dealer warranty will cover a new stepper motor if needed.